A Templot printout of a B9 crossover.
A Templot printout of a B9 crossover.
7th June 2007 12:38
Catcott Burtle diary: June 07 - March 08
Model Railway Layouts by Chris Nevard @ fotopic.net
Taken using a Nikon NIKON D200
The beginnings of Catcott crossing keeper's cottage. In recent years the building has been rendered with pebbledash and doors have been moved. When the line was open the roof was slated and the brick was visible with the stone lintels. I'll be adding slates individually from paper, nothing beats that, albeit time consuming. The corners are in fact mtrired at 45 degrees, not that it is obvious here.Previous | NextA close up of the structure. Very very light, very tough too. I will edge the board with 2mm marine ply from Addlestone Models. Whilst foamboard is tough, the surface is easily marked, a veneer of ply will sort that out.

Added on 7th June 2007, has been viewed 1324 times
(409 this year, 10 this month, 1 this week, 1 today)
© 2009 Chris Nevard - All rights reserved.
 
All photographic images* on this website are © 1981-2009 Chris Nevard. This Web Site and any of its contents may not be copied, translated or distributed in any manner (electronic, web or printed) without the prior written consent of Chris Nevard. Contact. We actively seek out copyright violations in print and on the Internet and will use full legal force to deal with any Copyright infringements. * Photographic images are defined as GIF & JPEG format image files.