The topside, the lower front section will be for the Rhyne as seen in my sketch. There will be plywood ends and a curved 1 foot high backdrop like with previous prejects. I hope to use Cement Quay's cassette yard. I will need to make a mirror image one too for the other end.
The topside, the lower front section will be for the Rhyne as seen in my sketch. There will be plywood ends and a curved 1 foot high backdrop like with previous prejects. I hope to use Cement Quay's cassette yard. I will need to make a mirror image one too for the other end.
7th June 2007 12:32
Catcott Burtle diary: June 07 - March 08
Model Railway Layouts by Chris Nevard @ fotopic.net
Taken using a Nikon NIKON D200
A close up of the structure. Very very light, very tough too. I will edge the board with 2mm marine ply from Addlestone Models. Whilst foamboard is tough, the surface is easily marked, a veneer of ply will sort that out. Previous | NextA mornings work with three sheets of A1 sized foamboard pulled out of the skip at work. I used to make model aeroplanes - maybe it shows here? The diagonal crossmembers reduce the chance of any twisting. This is going to be a very light layout. The size you see here is 5' x 15

Added on 7th June 2007, has been viewed 1577 times
(462 this year, 15 this month, 5 this week, 1 today)
© 2009 Chris Nevard - All rights reserved.
 
All photographic images* on this website are © 1981-2009 Chris Nevard. This Web Site and any of its contents may not be copied, translated or distributed in any manner (electronic, web or printed) without the prior written consent of Chris Nevard. Contact. We actively seek out copyright violations in print and on the Internet and will use full legal force to deal with any Copyright infringements. * Photographic images are defined as GIF & JPEG format image files.